Published
2021-07-27
Issue
Section
Original Research Article
License
The Author(s) warrant that permission to publish the article has not been previously assigned elsewhere.
Author(s) shall retain the copyright of their work and grant the Journal/Publisher right for the first publication with the work simultaneously licensed under:
OA - Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows for the copying, distribution and transmission of the work, provided the correct attribution of the original creator is stated. Adaptation and remixing are also permitted.
This license intends to facilitate free access to, as well as the unrestricted reuse of, original works of all types for non-commercial purposes.
How to Cite
Effect of doping with different amounts of nickel on the selective catalytic reduction NO of manganese oxides
Liqiang Chen
School of Science, Heihe University
Lina Sun
School of Science, Heihe University
Mingxia Zhu
School of Science, Heihe University
Lihua Chen
School of Science, Heihe University
Hao Li
School of Chemistry, Chemical Engineering and Materials, Heilongjiang University
Donghui Hu
School of Chemistry, Chemical Engineering and Materials, Heilongjiang University
Lihong Liu
School of Chemistry, Chemical Engineering and Materials, Heilongjiang University
Fulong Yuan
School of Chemistry, Chemical Engineering and Materials, Heilongjiang University
DOI: https://doi.org/10.24294/ace.v4i2.1345
Keywords: Selective Catalytic Reduction, NO, Nickel-Manganese Oxides, Synergistic Effect
Abstract
Nickel-manganese oxides were studied for selective catalytic reduction of NO by XRD,H2-TPR and N2 adsorption-desorption. The study was found that the catalyst Ni0.4 Mn0.6Ox showed the best SCR activity,the reasons may be as follows: Ni0.4Mn0.6Ox catalyst showed the optimal synergistic effect between nickel and manganese and appropriate redox ability, which were conducive to NH3 under the condition of low temperature catalytic reduction of NO.References
[1] Elbouazzaoui S, Corbos EC, Courtois X, et al. A study of the deactivation by sulfur and regeneration of a model NSR Pt/Ba/Al2O3 catalyst. Applied Catalysis B, Environmental 2005; 61: 236–243.[2] Huang Z, Liu Z, Zhang X, et al. Inhibition effect of H2O on V2O5/AC catalyst for catalytic reduction of NO with NH3 at low temperature. Applied Catalysis B, Environmental 2006; 63: 260–265.
[3] Larrubia MA, Ramis G, Buse G. An FT-IR study of the adsorption of urea and ammonia over V2O5-MoO3 urea and ammonia over V2O5-MoO3-TiO2 SCR catalysts. Applied Catalysis B, Environmental 2000; 27: 145–151.
[4] Reddy BM, Rao KN, Reddy GK, et al. Characterization and catalytic activity of V2O5/Al2O3-TiO2 for selective oxidation of 4-methylanisole. Journal of Molecular Catalysis A 2006; 253: 44–51.
[5] Chen L, Sun J, Liu L, et al. Calcination temperature on the catalytic reduction NO activity of nickel-manganese-titanium oxide. Journal of Engineering of Heilongjiang University 2018; 9(2): 33–37.
[6] Armor JN. Catalytic solutions to reduce pollutants. Catalysis Today 1997; 38: 163–167.
[7] Shi J, Gao C, Liu C, et al. Porous MnOx for low-temperature NH3-SCR of NOx: the intrinsic relationship between surface physicochemical property and catalytic activity. Journal of Nanoparticle Research 2017; 19: 194–205.
[8] Meng D, Zhan W, Guo Y, et al. Highly effective catalyst of Sm-MnOx for the NH3-SCR of NOx at low temperature: promotional role of Smand its catalytic performance. ACS Catalysis 2015; 5: 5973–5983.
[9] France L J, Yang Q, Li W, et al. Ceria modified FeMnOx-enhanced performance and sulphur resistance for low-temperature SCR of NOx. Applied Catalysis B, Environmental 2017; 206: 203–215.
[10] Fang N, Guo J, Shu S, et al. Enhancement of low-temperature activity and sulfur resistance of Fe0.3Mn0.5Zr0.2 catalyst for NO removal by NH3-SCR. Chemical Engineering Journal 2017; 325: 114–123.
[11] Yan L, Liu Y, Zha K, et al. Scale-activity relationship of MnOxFeOy nanocage catalysts derived from prussian blue analogues for low-temperature NO reduction: experimental and DFT studies. ACS Applied Materials & Interfaces 2017; 9(3): 2581–2593.
[12] Gao G, Shi J, Liu C, et al. Mn/CeO2 catalysts for SCR of NOx with NH3: Comparative study on the effect of supports onlow-temperature catalytic activity. Applied Surface Science 2017; 411: 338–346.
[13] Sun P, Guo R. Liu S, et al. The enhanced performance of MnOx catalyst for NH3-SCR reaction by the modification with Eu. Applied Catalysis A, General 2017; 531: 129–138.
[14] Li Y, Li Y, Shi Q, et al. Novel hollow microspheres MnxCo3-xO4 (x=1, 2) with remarkable performance for low-temperature selective catalytic reduction of NO with NH3. Journal of Sol-Gel Science and Technology 2017; 81: 576–585.
[15] Guo R, Li M, Sun P, et al. The enhanced resistance to P species of an Mn-Ti catalyst for selective catalytic reduction of NOx with NH3 by the modification with Mo. RSC Advances 2017; 7: 19912–19923.
[16] Liu F, Shan W, Lian Z. Novel MnWOx catalyst with remarkable performance for low temperature NH3-SCR of NOx. Catalysis Science and Technology 2013; 3(10): 2699–2707.
[17] Cai S, Zhang D, Shi L, et al. Porous Ni-Mn oxide nanosheets in situ formed on nickel foam as 3D hierarchical monolith de-NOx catalysts. Nanoscale 2014; 6(13): 7346–7353.
[18] Wan Y, Zhao W, Tang Y, et al. Ni-Mn bi-metal oxide catalysts for the low temperature SCR removal of NO with NH3. Applied Catalysis B, Environmental 2014; (148–149)C: 114–122.
[19] Lian Z, Liu F, He H. Manganese-niobium mixed oxide catalyst for the selective catalytic reduction of NOx with NH3 at low temperatures. Chemical Engineering Journal 2014; 250: 390–398.
[20] Chen L, Niu X, Li Z, et al. Promoting catalytic performances of Ni-Mn spinel for NH3-SCR by treatment with SO2 and H2O. Catalysis Communications 2016; 85: 48–51.