Published
2024-12-30
Section
Original Research Article
License
Copyright (c) 2024 Ismail Benchebiba, Mohamed Mostefaoui, Ahmed Nour El Islam Ayad, Abdelatif Gadoum

This work is licensed under a Creative Commons Attribution 4.0 International License.
The Author(s) warrant that permission to publish the article has not been previously assigned elsewhere.
Author(s) shall retain the copyright of their work and grant the Journal/Publisher right for the first publication with the work simultaneously licensed under:
OA - Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows for the copying, distribution and transmission of the work, provided the correct attribution of the original creator is stated. Adaptation and remixing are also permitted.
This license intends to facilitate free access to, as well as the unrestricted reuse of, original works of all types for non-commercial purposes.
How to Cite
Simulation of dielectric barrier discharge in argon-helium mixture for investigate the roles of plasma pressure and plasma temperature
Ismail Benchebiba
LGEER Laboratory Faculty of Technology, Hassiba Benbouali University of Chlef, 02000, Algeria
Mohamed Mostefaoui
LGEER Laboratory Faculty of Technology, Hassiba Benbouali University of Chlef, 02000, Algeria
Ahmed Nour El Islam Ayad
Electrical Engineering Department Faculty of Applied Sciences, Kasdi Merbah University of Ouargla, 30000, Algeria
Abdelatif Gadoum
Electrical Engineering Department Faculty of Applied Sciences, Kasdi Merbah University of Ouargla, 30000, Algeria
DOI: https://doi.org/10.59429/ace.v7i4.5584
Abstract
A one-dimensional fluid model is developed to analyze the effects of temperature and pressure on the characteristics of radiofrequency dielectric barrier discharge plasma. The model is run for an argon-helium mixture, in order to plot the maximum peak values of electron temperature, electric field strength and various species densities including electrons, atoms, ions and excited species as a function of plasma temperature in the range 300-550K, and as a function of plasma pressure in the range 0.2-1atm. The results show that an increase in the plasma temperature leads to an increase in electron temperature and electron density, and a decrease in electric field strength and non-electron species densities. In addition, an increase the plasma pressure leads to a decrease in electron temperature, an increase in electric field strength, and an increase in all species densities.
References
[1]. Hegemann D, Barkhordari A, Mirzaei SI, et al. Experimental Study of a Rotating Electrode Plasma Reactor for Hydrogen Production from Liquid Petroleum Gas Conversion. Applied Sciences 2022; 12(8): 4045. https://doi.org/10.3390/app12084045
[2]. Sun X, Bao J, Li K, et al. Advance in using plasma technology for modification of carbon-based materials and their applications in environmental, material, and energy fields. Advanced Functional Materials 2021; 31(7): 2006287. https://doi.org/10.1002/adfm.202006287
[3]. Papadimas V, Doudesis C, Svarnas P, et al. SDBD flexible plasma actuator with Ag-Ink electrodes: experimental assessment. Applied Sciences 2021; 11(24): 11930. https://doi.org/10.3390/app112411930
[4]. Domonkos M, Tichá P, Trejbal J, et al. Applications of Cold Atmospheric Pressure Plasma Technology in Medicine, Agriculture and Food Industry 2021 ;11(11) ; 4809 https://doi.org/10.3390/app11114809
[5]. Wilde N D, Xu H, Gomez-Vega N. A model of surface dielectric barrier discharge power. Applied Physics Letters 2021; 118(15): 154102. https://doi.org/10.1063/5.004339
[6]. El-Tayeb A, El-Dein AZ, Elnaggar AY, et al. Influence of temperature in degradation of organic pollution using corona discharge plasma. Sustainability 2021; 13(23): 12971. https://doi.org/10.3390/su132312971
[7]. Yoon MY, Yeom HJ, Kim JH, et al. Discharge physics and atomic layer etching in Ar/C4H6 inductively coupled plasma with a radio frequency bias. Physics of Plasmas 2021; 28(6): 063504. https://doi.org/10.1063/5.0047811
[8]. Wen DQ, Krek J, Gudmundsson JT, et al. On the importance of excited state species in low pressure capacitively coupled plasma argon discharges. Plasma Sources Sciences and Technology 2023; 32(6): 064001. https://doi.org/10.1088/1361-6595/acd6b4
[9]. Arserim EH, Salvi D, Fridman G, et al. Microbial Inactivation by Non-equilibrium Short-Pulsed Atmospheric Pressure Dielectric Barrier Dischrage (Cold Plasma): Numerical and Experimental Studies. Food Eng Rev 2021; 13 : 136-147 https://doi.org/10.1007/s12393-020-09256-7
[10]. Svarnas P, Papadopoulos PK, Vafeas P, et al. Influence of atmospheric pressure guided streamers (plasma bullets) on the working gas patters in air. IEEE Transactions on Plasma Science 2014 ; 42(10) : 2430-2431 https://doi.org/10.1109/TPS.2014.2322098
[11]. Khadir N, Khodja K, Belasri A. Methane conversion using a dielectric barrier discharge reactor at atmospheric pressure for hydrogen production. Plasma Science and Technology 2017; 19(9): 095502. https://doi.org/10.1088/2058-6272/aa6d6d
[12]. Benmoussa A, Belasri A, Larouci B. Gas Temperature Effect in Methane DBD Reactor for Hydrogen Production. Plasma Medicine 2022 ; 12(3) ; 41-58 https://doi.org/10.1615/PlasmaMed.2023047179
[13]. Zhang Z, Zhong KX, Liu Y, et al. Fluid simulation of atmospheric argon RF dielectric barrier discharges: Role of natural gas temperature. Physics of Plasmas 2024; 13(5): 053515. https://doi.org/10.1063/5.0202078
[14]. Baeva M, Stankov M, Trautvetter TJ. The effect of oxygen admixture on the properties of microwave generated plasma in Ar-O2: A modelling study. Journal of Physics D: Applied Physics 2021; 54(35): 355205. https://doi.org/10.1088/1361-6463/ac08cc
[15]. Ran S, Wang J, Lei B, et al. Numerical simulation of coaxial-coplanar dielectric barrier discharge in atmospheric helium. AIP Advances. 2022; 12(5): 055209. https://doi.org/10.1063/5.0089080
[16]. Hagelaar GJM, Pitchford LC. Solving the Boltzmann equation to obtain electron transport coefficients and rate coefficients for fluid models. Plasma sources science and technology. 2005; 14(4): 722. https://doi.org/10.1088/0963-0252/14/4/011
[17]. Yanguas-Gil A, Cotrino J, Alves LL. An update of argon inelastic cross sections for plasma discharges. Journal of Physics D: Applied physics. 2005; 38(10): 1588. https://doi.org/10.1088/0022-3727/38/10/014
[18]. Baeva M, Hemel F, Baierl H, et al. Two-and three-dimensional simulation analysis of microwave excited plasma for deposition applications: operation with argon at atmospheric pressure. Journal of Physics D: Applied Physics. 2018; 51(38): 385202. https://doi.org/10.1088/1361-6463/aad537
[19]. Lymberpoulos DP, Economou DJ. Fluid simulation of glow discharge: Effect of metastable atoms in argon. Journal of Applied Physics 1993; 73(8): 3668-3679. https://doi.org/10.1063/1.352926