Published
2025-03-19
Section
Review Article
License
Copyright (c) 2025 Sajjad H. Irhayyim, Layth S. Jasim

This work is licensed under a Creative Commons Attribution 4.0 International License.
The Author(s) warrant that permission to publish the article has not been previously assigned elsewhere.
Author(s) shall retain the copyright of their work and grant the Journal/Publisher right for the first publication with the work simultaneously licensed under:
OA - Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows for the copying, distribution and transmission of the work, provided the correct attribution of the original creator is stated. Adaptation and remixing are also permitted.
This license intends to facilitate free access to, as well as the unrestricted reuse of, original works of all types for non-commercial purposes.
How to Cite
Synthesis and application of SA-g-poly (AAc-IA)/ bentonite composite for norfloxacin drug adsorption from aqueous solution
Sajjad H. Irhayyim
Ministry of Education, Directorate of Education Al-Qadisiyah, AL- Diwaniya, 61002, Iraq
Layth S. Jasim
Department of Chemistry, College of Education, University of Al-Qadisiyah, Diwaniya, 61003, Iraq
DOI: https://doi.org/10.59429/ace.v8i1.5618
Abstract
This research explored the creation and application of a composite material, SA-g-poly (AAc-IA)/bentonite, for removing Norfloxacin (NOR) from water. Synthesized through copolymerization, the composite's properties were characterized using FTIR, TGA, FESEM, and AFM. FTIR analysis confirmed essential functional groups, with shifts observed in the 1500–1750 cm⁻¹ range post-NOR adsorption. FESEM images showed a porous surface, with particle sizes between 50–200 nm, that became less porous after adsorption. TGA analysis indicated thermal stability up to 300°C, followed by significant decomposition between 300–550°C due to organic component breakdown. Adsorption studies revealed equilibrium within 120 minutes, with a maximum adsorption capacity of 9.99 mg/g. Thermodynamic analysis confirmed a spontaneous and endothermic process, with ΔH of +23.76 kJ/mol. Kinetic modeling showed a pseudo-second-order mechanism, indicating chemisorption. These findings suggest the SA-g-poly (AAc-IA)/bentonite composite is a potentially efficient and cost-effective adsorbent for pharmaceutical wastewater treatment.
References
[1]. Khan, N.A., et al., Occurrence, sources and conventional treatment techniques for various antibiotics present in hospital wastewaters: a critical review. TrAC Trends in Analytical Chemistry, 2020. 129: p. 115921.
[2]. Aminnezhad, S., et al., Revolutionizing medicine: Molecularly imprinted polymers as precision tools in cancer diagnosis and antibiotic detection. Cellular and Molecular Biology, 2024. 70(5): p. 100-110.
[3]. Abdulsahib, W.K., et al., Adsorption Study of Cephalexin Monohydrate Drug in Solution on Poly (vinyl pyrrolidone-acryl amide) Hydrogel Surface. International Journal of Drug Delivery Technology, 2021. 11(4): p. 1169-1172.
[4]. Yuan, X., et al., Occurrence, fate, and mass balance of selected pharmaceutical and personal care products (PPCPs) in an urbanized river. Environmental Pollution, 2020. 266: p. 115340.
[5]. Cobian-Solorio, G., et al., Non-steroidal anti-inflammatory drugs adsorption from aqueous solution by MOFs MIL-100 (Fe), ZIF-8 and UiO-66: Synthesis, characterization, and comparative study. Journal of Molecular Structure, 2025. 1321: p. 139698.
[6]. Kulik, K., A. Lenart-Boroń, and K. Wyrzykowska, Impact of antibiotic pollution on the bacterial population within surface water with special focus on mountain rivers. Water, 2023. 15(5): p. 975.
[7]. Radhy, N.D. and L.S. Jasim, A novel economical friendly treatment approach: Composite hydrogels. Caspian Journal of Environmental Sciences, 2021. 19(5): p. 841-852.
[8]. Shah, A., et al., Sequential novel use of Moringa oleifera Lam., biochar, and sand to remove turbidity, E. coli, and heavy metals from drinking water. Cleaner Water, 2024: p. 100050.
[9]. Shah, A., et al., A review of physicochemical and biological contaminants in drinking water and their impacts on human health. Water Science and Engineering, 2023.
[10]. Rehman, H., et al., Potential of easily available low-cost raw cotton for the elimination of methylene blue dye from polluted water. Desalination and Water Treatment, 2024. 318: p. 100319.
[11]. Zeeshan, M., et al., Investigating the Interactions between Dyes and Porous/Composite Materials: A Comprehensive Study. Sustainable Chemistry for the Environment, 2025: p. 100217.
[12]. Jamel, H.O., et al., Adsorption of Rhodamine B dye from solution using 3-((1-(4-((1H-benzo[d]imidazol-2-yl)amino)phenyl)ethylidene)amino)phenol (BIAPEHB)/ P(AA-co-AM) composite. Desalination and Water Treatment, 2025: p. 101019.
[13]. Majeed, H.J., et al., Synthesis and application of novel sodium carboxy methyl cellulose-g-poly acrylic acid carbon dots hydrogel nanocomposite (NaCMC-g-PAAc/CDs) for adsorptive removal of malachite green dye. Desalination and Water Treatment, 2024: p. 100822.
[14]. N. Zghair, A., et al., Synthesis, characterization and adsorption properties of azo-functionalized polymeric hydrogels for R6G dye removal from water. Applied Chemical Engineering, 2025. 8(1): p. ACE-5604.
[15]. Arshad, R., T. Javed, and A. Thumma, Exploring the efficiency of sodium alginate beads and Cedrus deodara sawdust for adsorptive removal of crystal violet dye. Journal of Dispersion Science and Technology, 2023: p. 1-14.
[16]. Javed, T., et al., Batch adsorption study of Congo Red dye using unmodified Azadirachta indica leaves: isotherms and kinetics. Water Practice & Technology, 2024: p. wpt2024020.
[17]. Rehman, H., et al., Potential of easily available low-cost raw cotton for the elimination of methylene blue dye from polluted water. Desalination and Water Treatment, 2024: p. 100319.
[18]. Xu, Z., et al., Enhancing drug solubility through competitive adsorption on silica nanosurfaces with ultrahigh silanol densities. Proceedings of the National Academy of Sciences, 2025. 122(4): p. e2423426122.
[19]. Hasan, R.C., F.F. Karam, and S.J. Baqir. Synthesis and characterization of a novel organic reagent and its complexes with Cu (||), Cr(|||), Co(|||) and Fe(|||) metal. in IOP Conference Series: Earth and Environmental Science. 2022.
[20]. Kmal, R.Q., et al., Removal of Toxic Congo Red Dye from Aqueous Solution Using a Graphene Oxide/Poly (Acrylamide-Acrylic acid) Hydrogel: Characterization, Kinetics and Thermodynamics Studies. Journal of Chemical Health Risks, 2022. 12(4): p. 609-619.
[21]. Shah, A., et al., The effect of dose, settling time, shelf life, storage temperature and extractant on Moringa oleifera Lam. protein coagulation efficiency. Environmental Nanotechnology, Monitoring & Management, 2024. 21: p. 100919.
[22]. Shah, A., et al., Removal of cadmium and zinc from water using Sewage sludge-derived biochar. Sustainable Chemistry for the Environment, 2024: p. 100118.
[23]. Zou, M., et al., Effective adsorption of norfloxacin from water on magnetic biochar composite derived from cellulase hydrolysis apple branch: Synthesis optimization, performance assessment and mechanism insight. Process Safety and Environmental Protection, 2024. 185: p. 435-444.
[24]. Ashrul Asbollah, M., et al., Individual and competitive adsorption of negatively charged acid blue 25 and acid red 1 onto raw Indonesian kaolin clay. Arabian Journal for Science and Engineering, 2022. 47(5): p. 6617-6630.
[25]. Zhou, J. and Q. Sun, Sodium alginate/modified bentonite composite bead adsorptive removal of norfloxacin: static and dynamic adsorption. Polymers, 2022. 14(19): p. 3984.
[26]. Gopal, G. and A. Mukherjee, Adsorptive removal of norfloxacin from aqueous solutions by Fe/Cu CNS-embedded alginate–carboxymethyl cellulose–chitosan beads. RSC advances, 2024. 14(23): p. 15862-15875.
[27]. Shah, L.A., et al., Bentonite clay reinforced alginate grafted composite hydrogel with remarkable sorptive performance toward removal of methylene green. International Journal of Biological Macromolecules, 2024. 279: p. 135600.
[28]. Rafak, S.H. and L.S. Jasim, Synthesis of novel bentonite/pectin-grafted-poly (crotonic acid-co-acrylic acid) hydrogel nanocomposite for adsorptive removal of safranin O dye from aqueous solution. International Journal of Environmental Analytical Chemistry, 2024: p. 1-24.
[29]. Batool, M., et al., Applications of biodegradable polymers and ceramics for bone regeneration: a mini-review. International Journal of Polymeric Materials and Polymeric Biomaterials: p. 1-15.
[30]. Batool, M., M.N. Haider, and T. Javed, Applications of Spectroscopic Techniques for Characterization of Polymer Nanocomposite: A Review. Journal of Inorganic and Organometallic Polymers and Materials, 2022. 32(12): p. 4478-4503.
[31]. Haider, M.N., M. Batool, and T. Javeed, Biodegradable Magnesium Metal for Bone Regeneration: Mini Review. International Journal of Medical Reviews, 2022. 9(1): p. 241-243.
[32]. Maged, A., et al., Characterization of activated bentonite clay mineral and the mechanisms underlying its sorption for ciprofloxacin from aqueous solution. Environmental Science and Pollution Research, 2020. 27: p. 32980-32997.
[33]. Salama, A., et al., Crosslinked alginate/silica/zinc oxide nanocomposite: a sustainable material with antibacterial properties. Composites Communications, 2018. 7: p. 7-11.
[34]. Ikhtiyarova, G., et al., Characterization of natural-and organobentonite by XRD, SEM, FT-IR and thermal analysis techniques and its adsorption behaviour in aqueous solutions. Clay Minerals, 2012. 47(1): p. 31-44.
[35]. Shah, A., et al., Adsorptive removal of arsenic from drinking water using KOH-modified sewage sludge-derived biochar. Cleaner Water, 2024: p. 100022.
[36]. Sarkar, M., et al., Polypropylene-clay composite prepared from Indian bentonite. Bulletin of Materials Science, 2008. 31: p. 23-28.
[37]. Park, J.-H., et al., Application of montmorillonite in bentonite as a pharmaceutical excipient in drug delivery systems. Journal of Pharmaceutical Investigation, 2016. 46: p. 363-375.
[38]. Shah, L.A., et al., Characterization of Pakistani purified bentonite suitable for possible pharmaceutical application. Applied Clay Science, 2013. 83: p. 50-55.
[39]. Yeo, J.Y.J., et al., Experimental and modelling study of adsorption isotherms of amoxicillin, ampicillin and doripenem on bentonite-chitosan composite. South African Journal of Chemical Engineering, 2023. 43(1): p. 38-45.
[40]. Kgabi, D.P. and A.A. Ambushe, Characterization of South African Bentonite and Kaolin Clays. Sustainability, 2023. 15(17): p. 12679.
[41]. Feng, D., et al., Adsorption characteristics of norfloxacin by biochar prepared by cassava dreg: kinetics, isotherms, and thermodynamic analysis. BioResources, 2015. 10(4): p. 6751-6768.
[42]. Ahmed, M.J., Adsorption of non-steroidal anti-inflammatory drugs from aqueous solution using activated carbons. Journal of environmental management, 2017. 190: p. 274-282.
[43]. Hassan, S. and J. Ibrahim, Adsorption of some drugs onto surface of Iraqi kaolin clay. Pak. J. Chem, 2011. 1(3): p. 132-137.
[44]. Fang, X., et al., High-efficiency adsorption of norfloxacin using octahedral UIO-66-NH2 nanomaterials: Dynamics, thermodynamics, and mechanisms. Applied Surface Science, 2020. 518: p. 146226.
[45]. Salihi, E.Ç. and M. Mahramanlıoğlu, Equilibrium and kinetic adsorption of drugs on bentonite: Presence of surface active agents effect. Applied Clay Science, 2014. 101: p. 381-389.
[46]. Saruchi, et al., Microwave synthesize karaya Gum-Cu, Ni nanoparticles based bionanocomposite as an adsorbent for malachite green dye: kinetics and thermodynamics. Frontiers in Materials, 2022. 9: p. 827314.
[47]. Dekhyl, B.K.M.A.B. and T.A.H.A.M. Abbas, Kinetic Study of Adsorption for Doxycycline Drug from Aqueous Solutions by Bentonite and Activation Bentonite at Different Temperatures.
[48]. Parashar, A., S. Sikarwar, and R. Jain, Studies on adsorption kinetics of norfloxacin using nano alumina in aqueous medium. Analytical Chemistry Letters, 2020. 10(2): p. 227-239.
[49]. Parab, H., et al., Use of agro‐industrial wastes for removal of basic dyes from aqueous solutions. CLEAN–Soil, Air, Water, 2009. 37(12): p. 963-969.