Published
2025-09-15
Issue
Section
Original Research Article
License
Copyright (c) 2025 Zahraa A. Jawad1*, Falah K. Matloub

This work is licensed under a Creative Commons Attribution 4.0 International License.
The Author(s) warrant that permission to publish the article has not been previously assigned elsewhere.
Author(s) shall retain the copyright of their work and grant the Journal/Publisher right for the first publication with the work simultaneously licensed under:
OA - Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows for the copying, distribution and transmission of the work, provided the correct attribution of the original creator is stated. Adaptation and remixing are also permitted.

This license intends to facilitate free access to, as well as the unrestricted reuse of, original works of all types for non-commercial purposes.
How to Cite
Synergistic corrosion inhibition of carbon steel in cooling tower systems using sodium benzoate, zinc sulfate, and EDTA
Zahraa A. Jawad
12 University of Babylon, Chemical Engineering Department, Hilla, 51001, Iraq
Falah K. Matloub
12 University of Babylon, Chemical Engineering Department, Hilla, 51001, Iraq
DOI: https://doi.org/10.59429/ace.v8i3.5735
Keywords: cathodic and anodic inhibitors; dispersant agent; blend of salts solution corrosion
Abstract
The corrosion protection of cooling tower system is important due to the different types of salts and their concentrations increase continuously. The effectiveness of selected corrosion inhibitors—100 ppm sodium benzoate (C₆H₅COONa), 60 ppm zinc sulfate (ZnSO₄), and ethylenediaminetetraacetic acid (EDTA) at 10 and 20 ppm was investigated for carbon steel (CS) in saline environments with varying salt concentrations (1000, 3000, and 5000 ppm) and temperatures (28, 33, and 38 °C). Potentiodynamic polarization techniques were employed to assess corrosion potential (Ecorr), corrosion current density (Icorr), and Tafel slopes (βa and βc). The results demonstrated a significant reduction in corrosion rates with the addition of inhibitors. The highest inhibition efficiency, exceeding 96%, was achieved with 20 ppm EDTA at 33 °C in all salt concentrations. The synergistic effect of used inhibitors in mitigating corrosion was indicated. A notable synergistic effect among the inhibitors was also observed, further enhancing corrosion resistance.
References
[1]. Ismail, N. A., Moussa, A. M., Kahraman, R., & Shakoor, R. A. (2022). Study on the corrosion behavior of polymeric nanocomposite coatings containing halloysite nanotubes loaded with multicomponent inhibitor. Arabian Journal of Chemistry, 15(9), 104107. https://doi.org/10.1016/j.arabjc.2022.104107
[2]. Díaz-Jiménez, V., Gómez-Sánchez, G., Likhanova, N. V., Arellanes-Lozada, P., Olivares-Xometl, O., Lijanova, I. V., & Arriola-Morales, J. (2024). Current overview of corrosion inhibition of API steel in different environments. ACS Omega, 9(26), 27798–27831. https://doi.org/10.1021/acsomega.4c02108
[3]. El-Enin, S. A., and Amin, A. (2015). Review of corrosion inhibitors for industrial applications. International Journal of Engineering Research and Review, 3(2), 127–145.
[4]. Wagner, T. V., Parsons, J. R., Rijnaarts, H. H. M., de Voogt, P., and Langenhoff, A. A. M. (2018). A review on the removal of conditioning chemicals from cooling tower water in constructed wetlands. Critical Reviews in Environmental Science and Technology, 48, 1094–1125. https://doi.org/10.1080/10643389.2018.1512289
[5]. Li, C.-Q., and Yang, W. (2021). Steel corrosion and degradation of its mechanical properties. CRC Press.
[6]. Kokilaramani, S., Satheeshkumar, A., Nandini, M. S., Narenkumar, J., AlSalhi, M. S., Devanesan, S., ... & Malik, T. (2024). Application of photoelectrochemical oxidation of wastewater used in the cooling tower water and its influence on microbial corrosion. Frontiers in Microbiology, 15, 1297721.
[7]. Cherrad, S., Alrashdi, A. A., Lee, H. S., Elaoufir, Y., Lgaz, H., Satrani, B., Ghanmi, M., Aouane, E. M., and Chaouch, A. (2022). Cupressus arizonica fruit essential oil: A novel green inhibitor for acid corrosion of carbon steel. Arabian Journal of Chemistry, 15. https://doi.org/10.1016/j.arabjc.2022.103849
[8]. Grassino, A. N., Cindrić, I., and Halambek, J. (2021). Green corrosion inhibitors from biomass and natural sources. In Sustainable Corrosion Inhibitors (Vol. 107, p. 46). Elsevier.
[9]. Pourzarghan, V., & Fazeli-Nasab, B. (2021). The use of Robinia pseudoacacia L. fruit extract as a green corrosion inhibitor in the protection of copper-based objects. Heritage Science, 9(1), 1–14. https://doi.org/10.1186/s40494-021-00545-z
[10]. Davis, J. R. (2000). Corrosion: Understanding the basics. ASM International.
[11]. Roberge, P. R. (2019). Handbook of corrosion engineering (2nd ed.)McGraw-Hill Education.
[12]. Baboo, P. (2020). Integrated cooling tower for fertilizer complex: A new approach. International Journal of Engineering Research and Technology (IJERT, 9)(8), 1–10.
[13]. Liu, X., Wu, S., Qin, Y., Zhang, Y., Li, W., and Wang, Z. (2025). In-depth research into the synergistic inhibition mechanism of amino acids and KI on the corrosion of carbon steel in acidic medium. Journal of Solid State Electrochemistry. https://doi.org/10.1007/s10008-
[14]. Simate, G. S., Ndlovu, S., & Iyuke, S. E. (2017). A review of industrial cooling water treatment technologies and management practices. Journal of Cleaner Production, 168, 1075–1090. https://doi.org/10.1016/j.jclepro.2017.09.058
[15]. Mohammed, B. A., & Mohana, K. N. (2009). The effect of sodium benzoate and sodium nitrate on the corrosion behavior of low carbon steel in chloride medium. Monatshefte für Chemie - Chemical Monthly, 140(1), 1–8. https://doi.org/10.1007/s00706-008-0018-1
[16]. Raheem, D. (2011). Effect of mixed corrosion inhibitors in cooling water system. Al-Khwarizmi Engineering Journal, 7(4), 76-87pag.
[17]. Shaban, A., Felhosi, I., & Vastag, G. (2017). Synergistic effect of sodium benzoate and EDTA as corrosion inhibitors for carbon steel in chloride-containing solutions. Corrosion Science, 125, 61–69. https://doi.org/10.1016/j.corsci.2017.06.027.
[18]. Brixi, N., Sail, L., Bezzar, A., Sebouai, O., & Benmesmoudi, S. (2018). Temperature effects on corrosion inhibition of mild steel in 3% NaCl solution by EDTA and sodium benzoate. In Proceedings of the Third International Symposium on Materials and Sustainable Development (pp. 385–397). Springer. https://doi.org/10.1007/978-3-319-89707-3_45
[19]. Ahmed, S. A., Kareem, S. B. A., & Makki, H. F. (2020, March). Investigation hydraulic performance of splash fills packing in cooling tower. AIP Conference Proceedings, 2213(1), 1–6. AIP Publishing. https://doi.org/10.1063/5.0000342
[20]. Handi, S. O., Jehawi, O. H., Dabah, A. M., & Odan, A. M. (2022). Synergy effect of corrosion inhibitors for protection of mild steel in cooling water system. International Science and Technology Journal, 13(31).
[21]. Arief, H., Pramudita, M., & Pitaloka, A. B. (2023). Synergistic ability of tannin–silica as a corrosion inhibitor with the addition of KI to mild steel in demineralized water. World Chemical Engineering Journal, 7(1), 11–17. https://doi.org/10.32734/wcej.v7i1.10067








