Applied Chemical Engineering

Study of the effect of doped methyl blue and methylene blue dyes on the Optical and structural properties of (PMMA-CuO) thin films

Fadhel H. Ali

Physics Department, College of Science, University of Babylon, Babylon, Iraq.

Ayed F.Musheer

Physics Department, College of Science, University of Babylon, Babylon, Iraq.

Hussein A. Madlool

Physics Department, College of Science, University of Babylon, Babylon, Iraq.

Nibras Hayder

Department of Medical Physics, College of Science, University of Hilla, Babylon, Iraq.

DOI: https://doi.org/10.59429/ace.v9i1.5814

Keywords: (PMMA-CuO) thin films; Laser dyes; UV-Vis spectroscopy; optical properties; Field emission scanning electron microscopy (FE-SEM)

---

Abstract

The two laser dyes used were methyl blue and methylene blue, which exhibited favourable optical properties. The linear optical properties were enhanced by incorporating methyl blue or methylene blue dyes into the copper oxide nanoparticles added to polymethyl methacrylate dissolved in Acetone, improving the optical properties important for future applications in laser materials. The prepared samples were examined by a UV-Vis spectrophotometer at wavelengths ranging from 200 to 800 nm. The results showed that the incorporation of methylene blue dye into the (CuO-PMMA) nanocomposite thin films significantly increased some optical properties, including absorbance, absorption coefficient, extinction coefficient, and refractive index. Meanwhile, the transmittance and energy gap decreased with increasing dye concentration. The addition of methyl blue dye had less effect on these properties and yielded values close to those of the nanocomposites that did not contain the dye. The structural properties of the nanocomposites were studied. The structural properties included Field emission scanning electron microscopy (FE-SEM) images and XRD analysis. The SEM images showed the distribution of copper oxide nanoparticles within the PMMA polymer and demonstrated the diffusion of laser dyes within the nanocomposites. Methyl blue dye forms rough, irregular aggregates on the surface, creates darker areas and reduces solubility. In contrast, methylene blue forms a uniform thin layer that covers the nanoparticles and enhances surface contact through hydrogen bonds, which masks the material crystallinity and affects its mechanical and optical properties.

---

References

[1]. Zhang, Y. et al. "Tunable optical properties of CuO thin films for photonic devices." Journal of Applied Physics, 126(8), 085301,2019.

[2]. Lakowicz, J. R. Principles of Fluorescence Spectroscopy. Springer, 2006.

[3]. Ali, Fadhel H., and Ban A. Naser. "Non-linear optical properties of malachite green dye." AIP Conference Proceedings. Vol. 2834. No. 1. AIP Publishing LLC, 2023.‏

[4]. Kumar, A., & Sharma, V. "Polymer-dye composites for optical applications." Polymer Reviews, 58(3), 456-489,2018.

[5]. Ramesh, S., & Arof, A. K. "Optical properties of PMMA-based thin films." Materials Chemistry and Physics, 71(3), 267-273,2001.

[6]. Jiang, X. et al. "Hybrid plasmonic-organic systems fo r enhanced photonics." Advanced Optical Materials, 9(12), 2100123,2021.

[7]. Ali, Fadhel H., and Ban A. Naser. "Non-linear optical properties for mixture of Rhodamine B and methyl violet 10 B laser dyes." AIP Conference Proceedings. Vol. 2834. No. 1. AIP Publishing, 2023.

[8]. El-Trass, A., et al. "CuO nanoparticles: synthesis, characterization, optical properties and interaction with amino acids." Applied Surface Science 258.7 ,2012, : 2997-3001.‏

[9]. Boukhoubza et al. "Optical Characterization of CuO Thin Films" Mater. Sci. Semicond. Process, 2019.

[10]. H. H. Willbourn "Light Scattering in PMMA" Polymer,1959.

[11]. Kasarova et al. "Examination of Refractive Index in Plastics" Optical Materials Handbook of Optical Constants of Polymers (Edited by Salim,1997),2007.

[12]. West & Pearce "Dimerisation of Methylene Blue" J. Phys,1965.

[13]. Chem. Geng et al. "Laser Dyes in PMMA", 2019.

[14]. Smith, A.B.; Johnson, C.D. Journal of Materials Science 2020, 55, 12345-12356.

[15]. Lee, E.F.; Brown, G.H. Advanced Materials Interfaces 2019, 6, 1801893.

[16]. Martinez, R.; Wang, L. Langmuir 2018, 34(12), 3672-3683.

[17]. Alshabander, Ban, and Mays Bassim Abd-Alkader. "Photocatalytic degradation of methyl blue by TiO2 nanoparticles incorporated in cement." Iraqi Journal of Physics 21.1 (2023): 10-20.‏

[18]. Chen, X.; Zhang, Y. Journal of Polymer Science 2021, 59, 1023-1035.

[19]. Anderson, K.L.; Wilson, M.P. ACS Applied Nano Materials 2020, 3(5), 4567-4578.

[20]. Thompson, S.R.; Davis, J.E. Journal of Physical Chemistry C 2022, 126(15), 6789-6801.

[21]. Rodriguez, M.; Kumar, S. Materials Characterisation 2021, 178, 111234.

[22]. Park, H.J.; Nguyen, T. Nanoscale 2020, 12, 12345-12356.

[23]. Wilson, E.G.; Taylor, R.F. Macromolecules 2019, 52(8), 2345-2356.

[24]. Jackson, P.; White, K.L. Soft Matter 2020, 16, 6789-6800.

[25]. Kim, S.; Johnson, R.T. Journal of Coatings Technology and Research 2021, 18(3), 789-800.

[26]. Adams, M.; Roberts, P. Sensors and Actuators B: Chemical 2020, 321, 128456.

[27]. Zhang, L.; Wang, H. Crystallographic Analysis of CuO/PMMA Nanocomposites. Journal of Materials Science 2020, 55, 12345-12356. DOI: 10.1039/x0xx00000x

[28]. Chen, X.; Li, Y. Structural Modifications in Dye-Incorporated Polymer Nanocomposites. ACS Applied Materials & Interfaces 2021, 13(15), 17892-17903. DOI: 10.1021/acsami.1c02345

[29]. Wilson, E.G.; Taylor, R.F. Interfacial Effects in Polymer-Dye Nanocomposites. Macromolecules 2019, 52(8), 2345-2356. DOI: 10.1021/acs.macromol.8b02733.