Published
2024-01-12
Issue
Section
Original Research Article
License
The Author(s) warrant that permission to publish the article has not been previously assigned elsewhere.
Author(s) shall retain the copyright of their work and grant the Journal/Publisher right for the first publication with the work simultaneously licensed under:
OA - Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows for the copying, distribution and transmission of the work, provided the correct attribution of the original creator is stated. Adaptation and remixing are also permitted.
This license intends to facilitate free access to, as well as the unrestricted reuse of, original works of all types for non-commercial purposes.
How to Cite
Ronakkumar Shah
Department of Mechanical Engineering, A. D. Patel Institute of Technology
Vishal Chaudhary
Electrical Engineering Department, Madhav Institute of Technology & Science
Manoj Kumar
Mechanical Engineering Institute, ABES Engineering College
Feroz Shaik
Department of Mechanical Engineering, Prince Mohammad Bin Fahd University, Khobar 34754, Kingdom of Saudi Arabia
Digvijay Kulshrestha
Thompson Rivers University
Chandrakant Sonawane
Department of Mechanical Engineering, Symbiosis International University
Purva Saxena
IPE Global Limited
Ankit Oza
Department of Mechanical Engineering, Parul Institute of Technology, Parul University
Abhinav Kumar
Department of Nuclear and Renewable Energy, Ural Federal University Named After the First President of Russia
References
1. Machineni L, Deepanraj B, Chew KW, et al. Biohydrogen production from lignocellulosic feedstock: Abiotic and biotic methods. Renewable and Sustainable Energy Reviews 2023; 182: 113344. doi: 10.1016/j.rser.2023.1133442. Balakrishnan D, Manmai N, Ponnambalam S, et al. Optimized model of fermentable sugar production from Napier grass for biohydrogen generation via dark fermentation. International Journal of Hydrogen Energy 2023; 48(55): 21152–21160. doi: 10.1016/j.ijhydene.2022.12.011
3. Zhao Z, Zuo Z, Wang W, et al. Performance optimization for a combustion-based micro thermoelectric generator with two-stage thermoelectric module. Applied Thermal Engineering 2021; 198: 117464. doi: 10.1016/j.applthermaleng.2021.117464
4. Hiranandani K, Aravind B, Ratna Kishore V, et al. Development of a numerical model for performance prediction of an integrated microcombustor-thermoelectric power generator. Energy 2020; 192: 116624. doi: 10.1016/j.energy.2019.116624
5. Aravind B, Raghuram GKS, Kishore VR, et al. Compact design of planar stepped micro combustor for portable thermoelectric power generation. Energy Conversion and Management 2018; 156: 224–234. doi: 10.1016/j.enconman.2017.11.021
6. Hu L, Tian Q, Zou C, et al. A study on energy distribution strategy of electric vehicle hybrid energy storage system considering driving style based on real urban driving data. Renewable and Sustainable Energy Reviews 2022; 162: 112416. doi: 10.1016/j.rser.2022.112416
7. Xie B, Peng Q, Yang W, et al. Effect of pins and exit-step on thermal performance and energy efficiency of hydrogen-fueled combustion for micro-thermophotovoltaic. Energy 2022; 239: 122341. doi: 10.1016/j.energy.2021.122341
8. Galazutdinova Y, Al‐Hallaj S, Grágeda M, et al. Development of the inorganic composite phase change materials for passive thermal management of Li‐ion batteries: Material characterization. International Journal of Energy Research 2019; 44(3): 2011–2022. doi: 10.1002/er.5054
9. Ansari M, Amani E. Micro-combustor performance enhancement using a novel combined baffle-bluff configuration. Chemical Engineering Science 2018; 175: 243–256. doi: 10.1016/j.ces.2017.10.001
10. Wan J, Shang C, Zhao H. Anchoring mechanisms of methane/air premixed flame in a mesoscale diverging combustor with cylindrical flame holder. Fuel 2018; 232: 591–599. doi: 10.1016/j.fuel.2018.06.027
11. Peng Q, E J, Zhang Z, et al. Investigation on the effects of front-cavity on flame location and thermal performance of a cylindrical micro combustor. Applied Thermal Engineering 2018; 130: 541–551. doi: 10.1016/j.applthermaleng.2017.11.016
12. Bagheri G, Hosseini SE, Wahid MA. Effects of bluff body shape on the flame stability in premixed micro-combustion of hydrogen–air mixture. Applied Thermal Engineering 2014; 67(1–2): 266–272. doi: 10.1016/j.applthermaleng.2014.03.040
13. E J, Peng Q, Liu X, et al. Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor. Energy Conversion and Management 2016; 124: 427–438. doi: 10.1016/j.enconman.2016.07.048
14. Haj Ayed A, Kusterer K, Funke HHW, et al. Experimental and numerical investigations of the dry-low-NOX hydrogen micromix combustion chamber of an industrial gas turbine. Propulsion and Power Research 2015; 4(3): 123–131. doi: 10.1016/j.jppr.2015.07.005
15. Epstein AH. Millimeter-scale, micro-electro-mechanical systems gas turbine engines. Journal of Engineering for Gas Turbines and Power 2004; 126(2): 205–226. doi: 10.1115/1.1739245
16. Cao HL, Xu JL. Thermal performance of a micro-combustor for micro-gas turbine system. Energy Conversion and Management 2007; 48(5): 1569–1578. doi: 10.1016/j.enconman.2006.11.022
17. Jiang L, Zhao D, Yamashita H. Study on a lower heat loss micro gas turbine combustor with porous inlet. Combustion Science and Technology 2015; 187(9): 1376–1391. doi: 10.1080/00102202.2015.1019615
18. Wan J, Fan A, Yao H, et al. Effect of thermal conductivity of solid wall on combustion efficiency of a micro-combustor with cavities. Energy Conversion and Management 2015; 96: 605–612. doi: 10.1016/j.enconman.2015.03.030
19. Wan J, Fan A, Yao H, et al. Flame-anchoring mechanisms of a micro cavity-combustor for premixed H2/air flame. Chemical Engineering Journal 2015; 275: 17–26. doi: 10.1016/j.cej.2015.04.011
20. Gad MS, Elsoly A, Hamed HM, et al. Impact of oxy-hydrogen enriched gasoline on petrol engine performance and emissions. Journal of Thermal Analysis and Calorimetry 2022; 147(23): 13793–13803. doi: 10.1007/s10973-022-11513-2
21. Gad MS, El-Shafay AS, Ağbulut Ü, et al. Impact of produced oxyhydrogen gas (HHO) from dry cell electrolyser on spark ignition engine characteristics. International Journal of Hydrogen Energy 2024; 49: 553–563. doi: 10.1016/j.ijhydene.2023.08.210
22. Chen H, Liu W. Numerical investigation of the combustion in an improved micro combustion chamber with rib. Journal of Chemistry 2019; 2019: 1–12. doi: 10.1155/2019/8354541
23. Wang S, Yuan Z, Fan A. Experimental investigation on non-premixed CH4/air combustion in a novel miniature Swiss-roll combustor. Chemical Engineering and Processing - Process Intensification 2019; 139: 44–50. doi: 10.1016/j.cep.2019.03.019
24. Li J, Yang G, Wang S, et al. Experimental and numerical investigation on non-premixed CH4/air combustion in a micro Swiss-roll combustor. Fuel 2023; 349: 128740. doi: 10.1016/j.fuel.2023.128740
25. Ma L, Fang Q, Zhang C, et al. A novel Swiss-roll micro-combustor with double combustion chambers: A numerical investigation on effect of solid material on premixed CH4/air flame blow-off limit. International Journal of Hydrogen Energy 2021; 46(29): 16116–16126. doi: 10.1016/j.ijhydene.2021.02.118
26. Lefebvre AH. Gas Turbine Combustion, 2nd ed. Taylor and Francis; 1999.
27. Saravanamutto H, Cohen H, Rogers GFC, Straznicky PV. Gas Turbine Theory, 6th ed. Pearson College Div; 2008. 608p.
28. Pandya MP. Design Optimization and Simulation of Radial Inflow Gas Turbine in Small Capacity Range [PhD thesis]. Sardar Vallabhbhai Patel National Institute of Technology; 2004.
29. Kulshreshtha DB, Channiwala SA. Hydrogen fuelled micro gas turbine combustion chamber. HKIE Transactions 2011; 18(2): 19–25. doi: 10.1080/1023697x.2011.10668227
30. Mattingly J, Heiser W, Pratt D. Aircraft Engine Design, 2nd ed. AIAA; 2013. 719p.